Diagnosing a fuel issue. Dear ATVC: Hello – new to the forum. I picked up a second hand Coleman AT125UT. The 125UT has some issues that needs to be fixed. At the current moment I’m having an issue with it revving to high. First start up after cleaning fuel tank, replacing carb and spark plug […] More »
Go over all the bolts and see if it solves your problem. Dear ATVC: I have a Venom Madix 110 ATV that is leaking oil at the junction of the cylinder and cylinder head. I assume that it is a leaking head gasket? Can I re-torque the bolts on the cylinder head to possibly stop […] More »
Narrow diameter bars need more support. Dear ATVC: I noticed some race machines have handlebars that curve down into the clamps with no crossbar while others have a cross member usually with a pad on it. What’s the difference and which is better? “Better” in this case is a tough one to answer because it […] More »
Machines that fall in that sweet-spot between performance and maintenance. Dear ATVC: Hey guys, looking for opinions on which one is more reliable, easier to work on, and has longer longevity. My dad is looking to purchase a quad this spring, and he’s considering the following two models. He’ll mainly be exploring logging/fire roads. He […] More »
Fly(wheel) like a Falcon. Dear ATVC: Hi Folks, new here. Does anyone know what size of puller is needed to remove the flywheel on a Kazuma Falcon 110cc? The vast majority of small bore Chinese ATVs (50-125cc) were designed to use a 28×1.0 RH size puller. We say “most” because, and we discuss this often […] More »
Kawasaki-powered but is it 100% compatible? Dear ATVC: Hey all – so my 2004 Arctic Cat 650 V2 exhaust has rusted out and I can’t find a decent used one on eBay and, of course, you can’t buy new OEM these days. The 650 has the Kawasaki motor in it, presumably the same one as […] More »
The choices are many. Dear ATVC: Just picked up a new 7×14′ single axle ATV trailer with the removable sides that turn into ramps so you can load one up top left to right and one up the rear ramp straight forward. Was wondering if anyone had any recommendations for installing permanent tie downs. So […] More »