200cc motor question and help needed
#1
200cc motor question and help needed
I picked up a 200cc china atv that is pretty much new but the water pump failed in the first 5 miles and caused some engine problems. I need a cylinder head but the ones I see online look different. The motor says Boreem model # is JL163ML on it and its liquid cooled manual clutch and gears. The head I have has a different head cover and has 4 water ports around the cylinder where the ones on line have more. Does anyone know If I can use a different head like most of the websites sell and change the head cover to match or do I need to track down the idenical one. I believe this is a 2006 model year. It sat in a garage for 4 years and never got fixed. Thanks in advance
[IMG]http://s1083.photobucket.com/albums/j399/mortelec/atv/?action=view¤t=photo1.jpg
[/IMG]http://s1083.photobucket.com/albums/j399/mortelec/atv/?action=view¤t=photo2.jpg
[/IMG]http://s1083.photobucket.com/albums/j399/mortelec/atv/?action=view¤t=photo2.jpg
[IMG]http://s1083.photobucket.com/albums/j399/mortelec/atv/?action=view¤t=photo1.jpg
[/IMG]http://s1083.photobucket.com/albums/j399/mortelec/atv/?action=view¤t=photo2.jpg
[/IMG]http://s1083.photobucket.com/albums/j399/mortelec/atv/?action=view¤t=photo2.jpg
#3
#6
I picked up a 200cc china atv that is pretty much new but the water pump failed in the first 5 miles and caused some engine problems. I need a cylinder head but the ones I see online look different. The motor says Boreem model # is JL163ML on it and its liquid cooled manual clutch and gears. The head I have has a different head cover and has 4 water ports around the cylinder where the ones on line have more. Does anyone know If I can use a different head like most of the websites sell and change the head cover to match or do I need to track down the idenical one. I believe this is a 2006 model year. It sat in a garage for 4 years and never got fixed. Thanks in advance
[IMG]http://s1083.photobucket.com/albums/j399/mortelec/atv/?action=view¤t=photo1.jpg
[/IMG]http://s1083.photobucket.com/albums/j399/mortelec/atv/?action=view¤t=photo2.jpg
[/IMG]http://s1083.photobucket.com/albums/j399/mortelec/atv/?action=view¤t=photo2.jpg
[IMG]http://s1083.photobucket.com/albums/j399/mortelec/atv/?action=view¤t=photo1.jpg
[/IMG]http://s1083.photobucket.com/albums/j399/mortelec/atv/?action=view¤t=photo2.jpg
[/IMG]http://s1083.photobucket.com/albums/j399/mortelec/atv/?action=view¤t=photo2.jpg
did u ever figure out about your quad cause i have one with all the same numbers and motor and i cant find parts for it for the life of me i need a new rear axle shaft and the bolts for the rear axle houseing and dnt knw were to get them or what size
#7
After a few months a complete new motor showed up on eBay. I bought it and it was the same. I ordered parts from several china parts places and none of them were the same. They are a mystery for finding parts. I have a complete motor and trans that has a scored piston if you need any motor or trans parts. The first and last china atv I'll ever buy.
Trending Topics
#8
lucky for me this one was free i dnt need any motor or trans parts that i knw of just yet battery was dead so havent had a chance to try and start it all i knw i need right now is the rear axle shaft . i have a pitbike and have found parts for it no problem prity much honda parts but this quad is leaveing me for a loop i dnt even knw what rear axle shaft i need size and all its starting to **** me off
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)