You are currently viewing our forums as a guest, which gives you limited access to view most discussions and access our other features. By joining our community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join the ATVConnection Forums community today!
I've never seen a 125cc manual, but there are some light service manuals for 110cc quads. I wonder if they are similar enough to be useful...
If you want a couple 110cc manuals send me your email address by private message. They are in PDF format - 5 MBytes total. They cover clutch adjustment, valve adjustments, etc. They will not help you rebuild an engine.
If you still have a copy of the Tao Tao ATV manual, I would like you to send me a copy if possible. I have a ATA125D that was a gift on christmas morning, and unfortunately the clutch is locked up for some reason and as soon as it is put into gear it stalls out the engine....I'm asking Tao Tao o replace the entire basket and clutch plates since it is brand new....but what about the adjsutment linkages that go from the casing to the basket...was it supposed to come out in pieces when we opened the casing?
....If you still have a copy of the Tao Tao ATV manual, I would like you to send me a copy if possible....
Sent.... Let me know by private message if any problems.
To anyone else reading this, remember that posting your email address in a public forum exposes your email address to everyone, and will undoubtedly get sucked up into a lot of spam email lists. It is much safer to send the request and email address by private message.
My son's four wheeler was running fine then it wouldn't rev up to full rpm's, like it was flooded. I was trying to get it to rev up and it just quit. Then it would start. Cranked and cranked and it wouldn't not start. Pull the plug and laid it against the frame and cranked and it found it wasn't firing.
Now it wont even turn over. I jumped over the start solenoid with a screw driver and it will turn over but not fire or start.
When I hit the starter button on the handle bar nothing happens. When I hit the starter button on the remove I hear a click coming from the box with all the wires going to it, the moduall with the antenna.
He's only had it a week ,this rots...
I think the manual would be helpful if you would be kind enough to send it to me.
Last edited by RC-Wings; 09-03-2012 at 01:23 AM.
..My son's four wheeler was running fine then it wouldn't rev up to full rpm's, like it was flooded. I was trying to get it to rev up and it just quit. Then it would start. Cranked and cranked and it wouldn't not start. Pull the plug and laid it against the frame and cranked and it found it wasn't firing....
How many wires on your CDI?
Originally Posted by RC-Wings
....Now it wont even turn over. I jumped over the start solenoid with a screw driver and it will turn over but not fire or start.....
"Does not turn over" means completely different things to different people. To me it means that the starter doesn't turn, which you seem to confirm in the above quote. But then you say:
Originally Posted by RC-Wings
...When I hit the starter button on the handle bar nothing happens....
That is completely opposite. Does the starter turn or not? I'm confused...
Starters not turning, and "no spark" issues are unrelated to each other - except that if the only way you can turn the engine is with the starter motor then you won't get spark if the engine can't be cranked (obviously). But it is often possible to have an engine that cranks fine but won't start due to ignition circuit issues (or fuel issues, or compression issues, etc.)
Unplug the remote module (with the antenna). That should disable it. Any change in symptoms?
It sounds like you have more than one problem. If it were me I'd concentrate on getting the starter motor to crank on command, then focus in on any "no spark" issue. To that regard, when you turn on the ignition switch and step on the brake, look at the brake light. Is in "on"? The brake light is part of a safety starter interlock circuit. It prevents you from cranking the starter motor unless the brakes are applied. It's the same idea as with your car, which won't let you start up the car in "drive". Both keep you from having the vehicle lurch out of control on start up.
Last edited by LynnEdwards; 09-03-2012 at 09:54 PM.