110cc basic wiring setup
#12
Wiring diagram
Hi, any chance you could repost the diagram again as the one uploaded is out of focus. Thanks.
Apparently in my last post the attachment 6631 link is broken. It works fine on my computer even now, but not from any other. I suspect that my computer is loading it from internal cache instead of the now broken link at the forum. Here is that link again:
Attachment 6635
Click on the thumbnail for a larger picture.
Attachment 6635
Click on the thumbnail for a larger picture.
#13
#16
#17
Taotao 110 atv not starting
I have a Taotao 110 atv that is not getting a spark. It is turning over just not starting. I think it is the stator since I have had to replace it many times but I thought I should get a spare CDI also. My problem is there are 5 wires coming from the CDI (green, pink, gray, and red) but only 4 going to the wire harness. The black wire is disconnected. I think it is the timing trigger. If I buy a 5 pin replacement CDI, do I need to disconnect the 5th wire?
4 wires going to wire harness with black wire not connected
Back of wire harness on CDI side of harness
CDI side on right; green (ground) on bottom left
4 wires going to wire harness with black wire not connected
Back of wire harness on CDI side of harness
CDI side on right; green (ground) on bottom left
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 2 (0 members and 2 guests)