2001 kasea skyhawk 150
#1
2001 kasea skyhawk 150
hello, new to this site. my daughter has a 2001 kasea skyhawk 150 had to replace isolator between carb and cylinder (bought online at a&j parts).removed carb to also clean out carb bowl,gasket looks ok so put back together (rubber gasket). well carb gasket leaks,took apart again, got gasket material and made my own. ran for alittle,now gasket leaking again.looked online to find parts again, a&j doesn't sell the gasket,just wondering if anyone has an insight on where i could get this rubber gasket. any help would be greatly appreciated
thanks dave
thanks dave
#2
The chinese motors are pretty much all the same the difference comes in the style of motor so any motor with the style you have should fit. I believe you should have a small fan kind of attached to the cyl any tao tao or Roketa 150 is the same or should be.
Eagle Atv Parts
Eagle Atv Parts
#3
#5
What works well is red RTV automotive silicone. Put some in the track for the o ring put the o ring back in and then put some on the mating surface. Bolt everything back together and let it cure for 12-24 hours. did mine this way and never had a issue. This method is used all the time for sealing rc carbs.
#7
fuel bowl gasket
well, fixed it and know one will ever guess what i used!!!! it was leaking fuel,also i have a fuel filter in the line and the motor would not pull fuel through, so took it out, can blow air through, but no fuel. starts, runs fine now.
P.S. i used a piece of rubber pond lining and cut to size.........
P.S. i used a piece of rubber pond lining and cut to size.........
Thread
Thread Starter
Forum
Replies
Last Post
Ricardo Covarrubias
Kids Quads & Other ATV's - Ask an Expert!
1
09-17-2015 08:28 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)