I just bought a 2006 Baja wilderness trail 250 all wires cut
No factory plugs no harness nothing no ignition going to try toggle switch and push button stator wires are cut at plug seven wire blue,red,green,black,and 3 white wires i have a 7 wire CDI same wire colors as stator I hooked them up to the stator and a orange to + coil Blk/white toggle switch- side and another black to gron back to ground and the 3 white to rectifier with a red wire going to battery black to ground and there's a brain wire where it goes idk? What do I need to do to make spark?? And do I have this wired right? Is this all I need to power to get spark? Help the VIN prefix is laps