snow plows
#1
snow plows
i'm wanting to know if anyone can tell me where the the plows connect to the bikes ?do the connect some where on the front end or do they go further back on the frame. i'm going to make one and just wondered how the fatory ones mounted. thanks ahead of time for any replies.
02 375 4x4
custom bumper(made myself)
itp589
2000# winch
02 375 4x4
custom bumper(made myself)
itp589
2000# winch
#2
snow plows
thay bolt on just under the running boards you use the same holes your running boards do but you need a half inch longer bolt . the bracket itself is a peace of angle iron with two tabs hanging down about a 1/4 " apart with a hole driled through both tabs. then all you do is build the blade so that the arms have tabs on the ends with a hole in it then slide the arms under the two brackets and the tabs on the arms go between the two tabs on the two brackets [one on each side] then if you have a winch you use that to lift and lower the blade and if you dont you make an arm to lift and lower the blade. maybe go and ask the local cat dealer if he has some pictures of the blade and brackets and you'll see what i mean.
#3
snow plows
ps. i will take a few pictures of mine for you and i'll post them for you to see. ok . i work friday and after work me and a bunch of guys are going rideing so when i get home i will take the picks and try to get them on for sat for you to see if not sat sunday for sure.untill then hang loose.
#7
snow plows
Thanks for the pics bearthunder. I see Polaris goes all the way back to the ball hitch. I think I'll go to the frame like the cat mounts. As far as the reply to ecorman1: I have access to metal and cutting edges. Also rember that the word "Manufacture" means a "MAN" made something. I am man, let me show you what I can make! I've made my own custom bumper for my cat and more bar-b-que pits than I can count. Have welder and tourch will manufacture!
Trending Topics
#8
snow plows
I hear ya Grease... You go BOYEE! Wouldn't stop a man on the move who knows his bearings. I have welder, mig and lots of want to be. Problem with most of us is, we have more time than money. Thou I'm old, I still have more time... Good luck with all your projects. We'll be watchin'.
Chuck
Chuck
#9
snow plows
greasmky -----i dident forget. I took some picks with my digatal camera but they were to big to put on my page so i will take some more today and put them up tonight. i would have done it sooner but i was on nights i finished this morning plus i swamped my bike on saterday and i bin working on it in between work and sleep.i'll get them up for you tonight
Thread
Thread Starter
Forum
Replies
Last Post
TheATVSuperStore.com
TheATVSuperStore
0
09-09-2015 07:43 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)