Reversed Jumper Cables - Dead?
#1
Reversed Jumper Cables - Dead?
TAOTAO ATA-110H is dead because i accidently reversed jumper cables directly onto the positive & ground large-gauge ring-terminal wires.
There is no clicking sound, nothing seems to be alive. I replaced the stator, solenoid, and the cdi box. The kill switch AND the lights AND the reverse have all been disconnected from the very first time we purchased it used.
Prior to reversing the j-cables...we were always cranking it up with j-cables because both new and old batteries did not provide enough amps to get it turn over.
There is no clicking sound, nothing seems to be alive. I replaced the stator, solenoid, and the cdi box. The kill switch AND the lights AND the reverse have all been disconnected from the very first time we purchased it used.
Prior to reversing the j-cables...we were always cranking it up with j-cables because both new and old batteries did not provide enough amps to get it turn over.
#2
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)