wrong oil plug
#1
#2
This might be the gear indent spring and ball. Does this ATV have a shift lever of sorts? If so, first make sure the ball is no longer in there by using a magnetic tool to pull it out, then move your gear lever, if no ratcheting, then that was it.
I've also seen being part of the chain tensioner.
I've also seen being part of the chain tensioner.
#3
#4
There is sometimes a little filter/screen that is in that hole. Was it a much larger hole? not a 17mm like the regular drain plug. http://www.scooterpartsexpress.com/i...-S-448x448.jpg
#5
I have done it myself, and am fairly sure it is the cam chain tensioner, and the spring pushes a sort of tubular pushrod. Nothing except the spring and the tubular thing came out when I did this, so I pushed them back in and all was well. There is a posting on here somewhere showing the assembly, as it is quite common for people to mistake that plug for the drain plug.
Thread
Thread Starter
Forum
Replies
Last Post
Arh
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
7
11-09-2015 01:52 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)