Hi everyone!I just signed up on this site and Im hoping someone can help me out with a question i have.I have an 85 250sx that the front wheel bearings went bad on.I didnt catch it in time and the kids rode it untill 1 of the bearings came completely apart.I removed the old bearings and ordered new ones but my question is inside the hub there is some kind of spacer tube that got boogered up.I could probably put it back in but 1 of the washer like things on the end is screwed up.This part isnt available and I was wondering if its even necessary?It seems to me that if the bearings are pressed into place everything should be properly held together.Any thoughts? thanks Al

 

May be it was not fitted very well. so I can suggest you, just try one more time. Simply screw on the stud extenders, slip in the wheel spacers, and re-install your wheels. Widens the front wheel track by 3" and the rear track by 5".

Honda atv