You are currently viewing our forums as a guest, which gives you limited access to view most discussions and access our other features. By joining our community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join the ATVConnection Forums community today!
Hi all, Iím having problem with my 2002 Honda recon ES 250, I recently replaced angle sensor and bike shifts and runs great but suddenly when I put it in neutral it would not shift to any gear no sound at all, so I had to shut it off and back on and it works fine, and I noticed it its only gives me that problem when I was riding through 1 Ĺ feet of snow. But when it nice and dry out side works fine, any ideas.
thanks for reply, i noticed yesterday after 1 hour of riding my recon it was riding fine but after i put it in neutral the rpm goes up and i cant put it in first gear because of high rpm i don't know the reason why rpm goes so high is it because the bike is hot, so basically i have to pull the choke up so rpm goes down a little and than i can put it in gears and rides fine till again when i put it neutral. so something going-on with high rpm when in neutral hopefully i explained right. any ideas will be appreciated.