suggestions on how to cut plastics off
#3
I did my rear, and front, it looks bad ***.
1. figure out what look you want, if all you want to do is take a little off make a template so you can flip and the other side will loke the same. If you want the racing style, get somthing flexable to use as a straight edge.
2. mark what you want to take off with a marker, measure along the way.
3. carefully use your dremal, I used a carbide de-bur bit in myn.
4. now that you have un-even edges, take a 4" angle grinder and smooth the edges out, a belt sander for wood works even better.
heres my Polaris, look at the before/after pics, you will see a big difference. My cut plastic
1. figure out what look you want, if all you want to do is take a little off make a template so you can flip and the other side will loke the same. If you want the racing style, get somthing flexable to use as a straight edge.
2. mark what you want to take off with a marker, measure along the way.
3. carefully use your dremal, I used a carbide de-bur bit in myn.
4. now that you have un-even edges, take a 4" angle grinder and smooth the edges out, a belt sander for wood works even better.
heres my Polaris, look at the before/after pics, you will see a big difference. My cut plastic
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)