Atv logging
#12
09-09-2008, 06:11 PM
Pro Rider
Join Date: Oct 2001
Location: Cumberland WI
Posts: 1,346
Likes: 0
Received 0 Likes
on
0 Posts
#13
10-02-2008, 03:39 PM
#14
10-02-2008, 06:14 PM
Super Moderator
Well, golly JimBob!
Well, golly JimBob!
#15
10-03-2008, 12:42 AM
Join Date: Jun 2008
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
#16
10-03-2008, 02:34 AM
Pro Rider
Join Date: Oct 2003
Location: Alaska
Posts: 1,244
Likes: 0
Received 0 Likes
on
0 Posts
Atv logging
I recently used an old car hood (I think it was off a chevy nova) we welded a small chunk of chain to the front and a short chunk on the under side of the hood with 2 hooks.
We flipped the hood over so the flat side was down, used a PV to roll the log onto the hood and chained it down. Then hooked it to the hitch on the ATV and drove off through the brush and mud to the bandsaw mill.
I have a log wizard debarker attachment for my chainsaw and use it to clean the mud, if any, from where the bandsaw mill blade went through the log and would cut it into lumber.
Cheap trailer and works even better in the winter with a snow machine and there is not mud then but it is pretty cold.
Swampy
We flipped the hood over so the flat side was down, used a PV to roll the log onto the hood and chained it down. Then hooked it to the hitch on the ATV and drove off through the brush and mud to the bandsaw mill.
I have a log wizard debarker attachment for my chainsaw and use it to clean the mud, if any, from where the bandsaw mill blade went through the log and would cut it into lumber.
Cheap trailer and works even better in the winter with a snow machine and there is not mud then but it is pretty cold.
Swampy
#17
10-04-2008, 01:42 PM
#18
10-05-2008, 07:36 PM
Weekend Warrior
Join Date: Sep 2008
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Atv logging
For light land clearing weve used a old skid plate that has a angle to it, most anything that keeps the front edge of the log from digging into the trail as you drag the log.
We usally put two to four logs tethered (depending on size) next to each other and put the curved skid plat under the front of the logs to keep them from digging in as you drag them to the log deck.
Of course oa logging arch would work better if you have a lot to do.
We usally put two to four logs tethered (depending on size) next to each other and put the curved skid plat under the front of the logs to keep them from digging in as you drag them to the log deck.
Of course oa logging arch would work better if you have a lot to do.
#19
10-06-2008, 05:55 AM
Atv logging
I don't have any kind of log skidder or arch and used a chain to drag several trees at once behind my truck, down the road and back to my campsite. I don't remember how many miles it was but I actually wore down my log chain. [img]i/expressions/face-icon-small-blush.gif[/img] It was sand vs steel and the steel lost. I never did that again.
#20
10-06-2008, 02:39 PM
Weekend Warrior
Join Date: Sep 2008
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts