lt 80 doesnt roll freely
#1
#2
#3
I took the chain off and it rolls fine so I think it must be in the clutchs is there some thing I should be looking for don't know much about them
Also I drained the tranny and white fluid came out this cant be right what do I want to put back in and what is the easy way to get it in the little hole on top
Also I drained the tranny and white fluid came out this cant be right what do I want to put back in and what is the easy way to get it in the little hole on top
#5
The chain is fine Should the front sprocket turn freely with the chain off It does not it turns really hard And when I turn the engine over that small front sprocket turns I don't believe it should I think It should spin freely
#7
Trending Topics
#8
Ohio Motorcycle ATV Dealer - North Ridge Yamaha Suzuki - Geneva, OH - Scooter Utility-vehicle, snowmobile
You can look at a fiche there.
Remove all 4 footpeg bolts. Disconnect the plastic from the footpegs.
Lean it on the right side. Remove the rear tire.
Remove the bolts around the clutch cover AND the lil cover bolt at the 3 o'clock position
5mm allen and 8mm for the starter bolts and the pull start cover bolt.That'll get the clutch cover off.
17mm to get the clutchs off. You'll need a impact wrench for that.
You can look at a fiche there.
Remove all 4 footpeg bolts. Disconnect the plastic from the footpegs.
Lean it on the right side. Remove the rear tire.
Remove the bolts around the clutch cover AND the lil cover bolt at the 3 o'clock position
5mm allen and 8mm for the starter bolts and the pull start cover bolt.That'll get the clutch cover off.
17mm to get the clutchs off. You'll need a impact wrench for that.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)