LT80 front clutch
#1
LT80 front clutch
When servicing my front clutch I see that the micro - fiche at Motosport.com shows a washer ( part # 15 ) between the spacer and fixed drive; and the owners manual does not show it. ( I have a 92 and didn't have it in ). Question : is one needed, if so is it a special washer or can i just get one at Ace. In addition where is a good place to get parts as I may have to .replace the entire front clutch. I saw one on Ebay for 169.00 but don't know if it is OEM. Thanks
#3
#4
do you need an entire clutch or just the washer? your better off measuring your spacer and see if you have the old style longer one or the new short style, i have a few front clutch assemblies and washers/spacers, and i will sell them much cheaper then ebay, i just want them out of my shed and helping people get their kids riding
#5
I'm going to go with a new clutch assembly. This looks pretty worn so i think I will just go with parts from the starter gear out. The key way was sheared and everything else looks well used. This is my daughters quad, she is 9 and I would like to move her up to a blaster but I feel she is a little on the small side yet. I'll tell ya, I have had this 80 for a couple years now and it's been the biggest PIA I have owned. I ride 250r's and they are a pia sometimes but not near as much as this 80. If I didn't like 2 strokes so much I would move her into a 4 stroke but there isn't much between a Honda 90 and a 250. My spacer is the smaller one so what ever parts you have shoot me a line
#6
I'm going to go with a new clutch assembly. This looks pretty worn so i think I will just go with parts from the starter gear out. The key way was sheared and everything else looks well used. This is my daughters quad, she is 9 and I would like to move her up to a blaster but I feel she is a little on the small side yet. I'll tell ya, I have had this 80 for a couple years now and it's been the biggest PIA I have owned. I ride 250r's and they are a pia sometimes but not near as much as this 80. If I didn't like 2 strokes so much I would move her into a 4 stroke but there isn't much between a Honda 90 and a 250. My spacer is the smaller one so what ever parts you have shoot me a line
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)