4x4 not working in reverse
#1
#2
Should show 12 volts. Resistance on the two wires should be around 24 ohms.Should show reverse and awd symbol on the speedo I believe. If it's not showing check the gear position switch connection. Located near the gear case shift lever. Retired when this model came out,can't remember too much. Best if you have a cheap manual that can help.2011 Polaris Ranger 500 EFI CREW Service Manual PDF Download
#5
Problem could be speedo related and the manual has a connector pin test that can help narrow down the problem. Don't know if if you can by pass this speedo as you could on the atv models by jumping the brown/white to a brown. Since you have awd in forward range,by passing wouldn't help on reverse I'd think. Just look at the awd and speedo trouble shooting guide in the manual.
#6
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)