Originally Posted by skram
I want to bypass my oil injection what do I mix my xplorer 300 at ? I also gave her alittle body mod...I put new pro taper bars on and removed the dummy lights, after doing so my headlights brake lights and fan didn't work. I wired the fan direct on a toggle, Why would those dummy lights effect everything? do they have to be there to complete the circuits? I went riding yesterday and she started running rough, She finally quit thats when I realized the fan wasn't working. I let cool and got her home, wired the fan, went for another ride...quit again, seemed to be a fuel issue dirt in tank wasn't getting fuel so I put it reserve got her home...cleaned the tank put fresh gas in went around the block and she quit again half way can't get her started???????????? what now???
Check compression,if ok(around 100 psi minimum) then check carb for trash in the jets.If runs and quits could be loosing compression when hot,may be time for a little piston /cylinder work????
Dont know how you wired things up,but sounds like a ground problem OR you are triggering the thermal fuse. Oil line goes directly into carb on left side,if has oil in line I would leave alone as pumps are pretty dependable,BUT if you have to disconnect make sure the carb inlet is blocked off.