xplorer running hot?
#1
xplorer running hot?
My 2002 xplorer is running really hot. I added an AAEN pipe with a stock scrambler muffler and clutch kit but I cant get the jets dialed in correctly. It gets so hot that the brake lines heat up and it locks up the brakes.
Can anyone give me a baseline on the proper jetting for it? the motor is stock. I had to install an oil block off kit and premix the gas. I installed the pipe, clutch kit and a K&N air filter.
Can anyone give me a baseline on the proper jetting for it? the motor is stock. I had to install an oil block off kit and premix the gas. I installed the pipe, clutch kit and a K&N air filter.
#2
#3
#5
put a big jet in it, so it will hardly run then start leaning out. 220 probably pretty lean.
at sea level maybe try a 270 to start with. you want to over shoot it. if you slowly go rich you may find the danger zone. Because you might be leaner than that spot.
What does aaen suggest for jetting at sea level? they should have an idea.
Are you loosong any coolant? The cooling systems on these don't work anless they are right full. because of the rad having both spigots at the top.
at sea level maybe try a 270 to start with. you want to over shoot it. if you slowly go rich you may find the danger zone. Because you might be leaner than that spot.
What does aaen suggest for jetting at sea level? they should have an idea.
Are you loosong any coolant? The cooling systems on these don't work anless they are right full. because of the rad having both spigots at the top.
Thread
Thread Starter
Forum
Replies
Last Post
Frisky2050
Buying an ATV
10
04-09-2020 11:19 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)