03 vinson starting problems
#1
03 vinson starting problems
So I have a 2003 Suzuki Vinson Auto and I when i hit the start button it makes a grinding sound as if the starter wasnt engaging/disengaging...so I purchased a new starter for it jumping the gun. Now I inspected the gears that the starter meshes up to and they were in prime condition. However it appears that the gear it needs to mesh with is actually the engager/disengager and its not working properly because with the new starter it makes the same sound as the old one. Any suggestions?
thanks ahead of time
-Mike
thanks ahead of time
-Mike
#2
03 vinson starting problems
yea umm...just took off front cover on pull start side...believe it or not theres a hole that holes a bushing or something in it that basically folded out and then it went ahead and tore a huge chunk out of my crank case also where the starter something or another needs to be mounted to. I knew i was going to get the 581 kit but christ sakes a whole new freaking crankcase? Does anyone know if i can buy just a single side or do i need to change teh whole freaking thing?
thanks
-Mike
thanks
-Mike
#3
#4
#5
#6
03 vinson starting problems
look at my pictures...remove the pawl start assembly and then dismantle the cover that holds the water pump on etc. Make sure you have a drain pan to collect the oil and whatnot from the machine. My starter was NOT defective...my machines decided to shear chunks of metal off the crankcase and outer cover that contains the starter stuff.
-Mike
-Mike
#7
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)