06' suzuki lt-z50 NO SPARK
#1
06' suzuki lt-z50 NO SPARK
Hi guys! Brand new to the forum and I've been doing some great reading on here. But I can't seem to find what I'm looking for. I picked up a 2006 Suzuki LT-Z50 for my daughter and I am running out of brain power.....
The bike has no spark. I've purchased a factory service manual and followed all of the trouble shooting guides. Previous owner had some time in it and supplied a new coil and a new cdi box.
After following the trouble shoot guides and using a fluke test meter I thought I had figured out the issue. So I replaced the stator and pick up coil assembly. No changes! If the parking brake is not set, no crank. If the killswitch is not set, no crank. If the tethered kill switch is not pushed in, no crank. So I am "assuming" these connections are good. I don't know what else to check.
Any guidance or help would be greatly appreciated.
Thanks,
Bob
P.s.- I'm unsure of how to post a picture of the wiring diagram.
The bike has no spark. I've purchased a factory service manual and followed all of the trouble shooting guides. Previous owner had some time in it and supplied a new coil and a new cdi box.
After following the trouble shoot guides and using a fluke test meter I thought I had figured out the issue. So I replaced the stator and pick up coil assembly. No changes! If the parking brake is not set, no crank. If the killswitch is not set, no crank. If the tethered kill switch is not pushed in, no crank. So I am "assuming" these connections are good. I don't know what else to check.
Any guidance or help would be greatly appreciated.
Thanks,
Bob
P.s.- I'm unsure of how to post a picture of the wiring diagram.
Last edited by robdnice; 04-24-2015 at 09:02 PM. Reason: adding picture
Thread
Thread Starter
Forum
Replies
Last Post
ATVC Correspondent
Classifieds, Garage Sale & Swap Shop
0
07-15-2015 02:07 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)