Poor Idle, Plug Check Please
#1
Poor Idle, Plug Check Please
Please tell me what you think of these plugs. This is on a 1989 LT250R Quadracer that has a very poor idle, mostly stalls out. By the way, carb is cleaned, float level set per manual, reeds checked, etc.
This is 1/4 throttle run for about a half a mile and a plug chop.
FIRST PLUG - AIR SCREW 3 TURNS OUT
SECOND PLUG - AIR SCREW 1.5 TURNS OUT
THIRD PLUG - AIR SCREW 0 TURNS OUT
This is 1/4 throttle run for about a half a mile and a plug chop.
FIRST PLUG - AIR SCREW 3 TURNS OUT
SECOND PLUG - AIR SCREW 1.5 TURNS OUT
THIRD PLUG - AIR SCREW 0 TURNS OUT
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)