1996 Polaris explorer 400
#1
1996 Polaris explorer 400
Hi I have a explorer 400 2 stroke atv I'm having trouble with it running, the atv will start and idle fine but when I put it in gear and give it gas it runs okay until about half throttle ,then it make a low bogging noise and eventually shuts off I have took carburetor apart and cleaned it it helped the bogging noise a lil but didn't fix the issue im rly stumped on this ,any ideas
#2
Pull the black wire from the reverse limiter and see if that makes any difference. They can short out and start limiting in forward range also. Located behind the oil tank and wire runs to the circuit board located on the left side under the fuel tank plastic.Item#32.Dirt Cheap Yamaha, Polaris, Suzuki & Kawasaki OEM Parts & Accessories – Cycle Parts Warehouse
#3
Pull the black wire from the reverse limiter and see if that makes any difference. They can short out and start limiting in forward range also. Located behind the oil tank and wire runs to the circuit board located on the left side under the fuel tank plastic.Item#32.Dirt Cheap Yamaha, Polaris, Suzuki & Kawasaki OEM Parts & Accessories – Cycle Parts Warehouse
Thread
Thread Starter
Forum
Replies
Last Post
Cdenton
Technical and How-To Articles
1
09-09-2015 11:23 AM
GirlsCan2
Technical and How-To Articles
0
08-27-2015 02:58 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)