Yamaha Discussions about Yamaha ATVs.

Going to Glamis, Need some jetting info

Thread Tools
 
Search this Thread
 
  #1  
Old 10-13-2000, 01:19 PM
RoostKing's Avatar
Extreme Pro Rider
Thread Starter
Join Date: Jul 1999
Posts: 2,858
Likes: 0
Received 0 Likes on 0 Posts
Default

Guys and Gals,
Looks like I will be going to Glamis over the Thanksgiving weekend, WHOOOOHOOOOO. ANyhow, I currently ride at 6000-8000 ft of elevation with FMF/Fatty's, reeds, reed spacer, Proflow/K&N. My curent jetting is 240's. What would you recommend for the elevation of Glamis. I know it will be in the 300+ size range but Id like some input from those that have a similar setup. I still have my TORS junk, so I dont want to have to do a bunch of trial and error unless I have too. Thanks in advance, maybe Ill see you at Glamis! Oh yea, are fireworks allowed? Oh yea, its a banshee...

RoostKing...
 
  #2  
Old 10-13-2000, 01:28 PM
BansheeBill's Avatar
Trailblazer
Join Date: Apr 2000
Posts: 97
Likes: 0
Received 0 Likes on 0 Posts
Default

You will be happy with either 300's or 310's depending on the temperature and weather. Here in Phoenix (altitude 1,625')I am running 310 mains with 30 pilots with no problems although I would probably run 290's or 300's if I rode here exclusively. Fireworks aren't permitted but you will see plenty of them anyway. Just be careful, they have really stepped up the patrolling and enforcement at the dunes in the last couple of years.
 
  #3  
Old 10-13-2000, 05:34 PM
SandmanBlue's Avatar
Pro Rider
Join Date: Aug 1999
Posts: 328
Likes: 0
Received 1 Like on 1 Post
Default

Use 320's.

This is for pipes, no airbox lid, proflow kit, reeds, stock porting, stock compression, stock pilots, needles in 4th groove from top, 92 octane pump gas at 32:1 (Yamalube R, Silkolene Comp-2, Klotz Super Techniplate). BTW - I like the Klotz oil because it burns clean and is a synthetic + castor blend.

I leave mine with 320's all season. Better to be safe than sorry, and I haven't had problems with fouling plugs. I had run 300's at first but noticed the motor starting to lean out at the tops of big dunes. Ran 310's and it ran OK, but went to 320's to be safe.
 
  #4  
Old 10-14-2000, 01:30 AM
paulb's Avatar
Range Rover
Join Date: May 2000
Posts: 153
Likes: 0
Received 0 Likes on 0 Posts
Default

if the k&n filter breath better than a pro-design foam filter , you will be spot-on with 310 mains.
i run 300 mains with the same mods as you exept for the foam .
 
  #5  
Old 10-14-2000, 01:45 PM
SBISHOP's Avatar
Trailblazer
Join Date: Apr 2000
Posts: 34
Likes: 0
Received 0 Likes on 0 Posts
Default

i have toomey pipes with his jet kit. i run a 300 main and the stock pilot jet with the 4 grove on the nitle jet. i just hope there is still a glamis that we can ride at. as of the first of the year (2001). glamis is going to be cut in hafe. from the wall down 4 miles of this side of butter cup is going to be closed. we need to do something about this. go to glamisonline.org and read up on it. we all need to do our part.
 
  #6  
Old 10-15-2000, 07:35 PM
scottd's Avatar
Pro Rider
Join Date: Feb 2000
Posts: 837
Likes: 0
Received 0 Likes on 0 Posts
Default

I knew this was a rumor, but where did you hear about the specific part of the dunes to be closed? How in hell can they do this without considering the off road crowd? It appears they want to close down the very best parts. This is a total crock of BS...If we all love our sport, then more of us better make our wishes known!
Tell me it ain't so!!!
 
  #7  
Old 10-15-2000, 11:54 PM
SBISHOP's Avatar
Trailblazer
Join Date: Apr 2000
Posts: 34
Likes: 0
Received 0 Likes on 0 Posts
Default

Did you read what they had to say on the web sit? go to www.glamisonling.org and read what they have to say. i've been going to glamis for abour 15 years and in the thoes years i have came to know glamis as my home away from home. how do you think i feel. we all must become one and fight the blm and the gov. on this topic.
 
  #8  
Old 10-16-2000, 12:28 PM
ATVdunePro's Avatar
Range Rover
Join Date: Sep 2000
Posts: 122
Likes: 0
Received 0 Likes on 0 Posts
Default

Dont have jetting info, but I wanted to remind you to please keep Glamis clean. They have a *giant* trash bin near the Ranger Station to throw away waste.

Bring plenty of trash bags and please use them. Also dont burn wood pallets unless you want to contribute to the nail problem.

Blake
2001 Yamaha Sand Raptor 660R

Please visit www.glamisonline.org for everything you want to know about Glamis.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
buddieboy
Chinese Quads
4
12-09-2016 05:50 PM
exmotocrosser
Polaris
2
09-26-2015 08:18 AM
woodthings
Chinese Quads
4
09-25-2015 05:58 PM
Todd C Wadas
2) Chassis problems..
0
09-23-2015 11:31 PM
XxS0ccerstarxX
Honda
2
09-22-2015 02:40 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: Going to Glamis, Need some jetting info



All times are GMT -5. The time now is 03:42 AM.