Raptor Starter problem HELP.....
#1
#2
Raptor Starter problem HELP.....
That's a common problem on the 660's and it's caused by a faulty starter clutch. It's under $200.00 for a new starter clutch and hub. If you don't fix it it will stop starting someday (soon) and thay aren't much fun the catch in gear[img]i/expressions/face-icon-small-mad.gif[/img]
#4
Raptor Starter problem HELP.....
Yes the starter clutch and the one way bearing are the same thing.(it's called the one way starter clutch in the yamaha service manual) It's located under the left side cover (left as you sit on the quad) the hardest part of the job is getting the magneto rotor off of the shaft, for this you will need a puller. After that the rest is cake.
The starter clutch bolts tighten to 11 ft lb and the magneto rotor nut to 110 ft lb side cover bolts to 7.2 ft lb
Hope this helps, if you need any other info let me know
The starter clutch bolts tighten to 11 ft lb and the magneto rotor nut to 110 ft lb side cover bolts to 7.2 ft lb
Hope this helps, if you need any other info let me know
Thread
Thread Starter
Forum
Replies
Last Post
toonces
Buying an ATV
17
10-16-2019 12:11 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)