Blaster w/only reverse
#1
#2
Mine never goes reverse..... Sounds like the compression rolled it over the wrong way when it fired.... Is the flywheel all you've changed? Is the Stator plate the original or an after market one? Has there been any cylinder/head work done?
Any one of those could be messin' with ya, maybe more.
#3
I didn't change the flywheel or the stator they should still be factory just the woodruff key a crap load of time it kept shearing and now it doesn't. I did put new rings in it. It was bored 30over sometime before I got it. I have removed all lights, tors, only have bareminimal wires left. If I pulled the cylinder head what would I be looking for? I'm pretty sure that it isn't a woodruff key. Thanks
#4
I didn't change the flywheel or the stator they should still be factory just the woodruff key a crap load of time it kept shearing and now it doesn't. I did put new rings in it. It was bored 30over sometime before I got it. I have removed all lights, tors, only have bareminimal wires left. If I pulled the cylinder head what would I be looking for? I'm pretty sure that it isn't a woodruff key. Thanks
When you pull the flywheel to check it out, look and see if there are slots for mounting the stator plate. It could be an adjustable one,.... it might cause problems if it's adjusted wrong..... a lot of little picky items to go back and check..... but shearing that key would bother me a lot.... like there's something way loose.... like the flywheel....
#5
i havent sheared a key in awhile so i would cross that out. I think at first when i was messing w/the stator i wasn.t realy tighting down the nut ( on off on off ect ) testing wires alot of electrical issues. piston I believe is in right arrow fwd. the stator is eighter 180 off w/no spark or true w/spark no timing mark or advancement. Thank you keep the ideas coming please. (what about the cdi firing then jump spark (cross connection)or something inside to cause this issue? I dont have $100 just to throw at it or I would.
#6
#7
I'm just curious.... Did you happen to take pictures to show how this works?
Trending Topics
#10