Raptor Reverse Rev Limiter coming on while going forward
#1
Raptor Reverse Rev Limiter coming on while going forward
We have a 2004 600 Raptor and for some reason at a certain RPM the rev limiter and reverse light come on. Has anyone ever heard of this?
We tore the machine apart and checked all the connections for bad grounds and/or cut wires and didn't find anything.
It seems to be related to moisture... when you wash the machine or go through water, it will run good for a little bit till it dries out.
The dealer said it could be a bad ground or the box going bad but wanted to give a shout out to see if anyone else had this problem since we can't find a bad ground (and we tore thing thing nearly 90% apart looking).
We tore the machine apart and checked all the connections for bad grounds and/or cut wires and didn't find anything.
It seems to be related to moisture... when you wash the machine or go through water, it will run good for a little bit till it dries out.
The dealer said it could be a bad ground or the box going bad but wanted to give a shout out to see if anyone else had this problem since we can't find a bad ground (and we tore thing thing nearly 90% apart looking).
#2
#4
Actually it makes perfect sense. Water with minerals in it is a very good conductor of electricity. Those contacts are very close together in a little switch and a little water can bridge the gap and turn the light on.
#5
#6
Thread
Thread Starter
Forum
Replies
Last Post
KimSJoh
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
14
07-18-2015 07:20 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)