Spongy Brake Lever??
#1
Spongy Brake Lever??
I recently bought a 95 Kodiak. It only has 800 miles but was neglected. When I got it one of the screws for the cap on the front brake resivior was missing and the fluid was almost gone. So I bled/flushed the system completely and replaced the cap screws.
Now the brakes will work a little if I pump the lever, on the first pull of the lever it goes strait to the grip but after 2-3 pumps it grabs a little. The lever adjustment was maxed out when I got the machine.
I tried taking the drums off to look for an adjustment there but I can't get them off for the life of me. I think they're rusted on.
Anyone have any ideas on what I should do next, I'm thinking replace the brake lines. Any input would be appreciated, thanks guys.
Now the brakes will work a little if I pump the lever, on the first pull of the lever it goes strait to the grip but after 2-3 pumps it grabs a little. The lever adjustment was maxed out when I got the machine.
I tried taking the drums off to look for an adjustment there but I can't get them off for the life of me. I think they're rusted on.
Anyone have any ideas on what I should do next, I'm thinking replace the brake lines. Any input would be appreciated, thanks guys.
Thread
Thread Starter
Forum
Replies
Last Post
oliveiracarlos
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
0
09-07-2015 03:39 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)