Timberwolf no spark after new stator
#1
Timberwolf no spark after new stator
I'm about at my wits end. I have a 94 timberwolf with a no spark issue. I initially found that the pick up what was way out of spec so I ordered up a new stator/pick up. Replaced it and still no spark. I have a fluke 88 with a tach inductive and I get rpm's off of the primary wire going to the coil but the coil is doing nothing. I pulled another coil off another machine and tried that but had the same results. I've tested everything else to make sure nothing else is causing this. Has anyone seen a tach signal to the coil but its not firing? Could I possibly have a bad CDI giving out too weak of a signal?
#2
Thread
Thread Starter
Forum
Replies
Last Post
WesTech
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
11
08-11-2015 07:55 AM
willday08111217@gmail.com
Technical and How-To Articles
0
08-01-2015 04:05 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)