4 Zinger carb issues
#1
04-25-2016, 11:16 PM
Join Date: Apr 2016
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
4 Zinger carb issues
I recently purchased a Yamaha 4 Zinger, 86 i think. It was difficult to start so I replaced the carb and put in a new spark plug in. It still doesn't want to start. If i give it full choke and place my hand over the carb i can get it to start and idle as long as my hand is covering the carb. I checked the compression and i have 90 PSI with one full pull and 120 on the second pull. When i pull the plug after trying to start without my hand on the carb it is dry so i don't think i'm getting fuel. Any ideas would be appreciated.
#2
04-26-2016, 08:13 AM
Pro Rider
Join Date: Jan 2016
Location: Whitesburg, TN
Posts: 591
Likes: 0
Received 0 Likes
on
0 Posts
I recently purchased a Yamaha 4 Zinger, 86 i think. It was difficult to start so I replaced the carb and put in a new spark plug in. It still doesn't want to start. If i give it full choke and place my hand over the carb i can get it to start and idle as long as my hand is covering the carb. I checked the compression and i have 90 PSI with one full pull and 120 on the second pull. When i pull the plug after trying to start without my hand on the carb it is dry so i don't think i'm getting fuel. Any ideas would be appreciated.
Thread
Thread Starter
Forum
Replies
Last Post
reezy
Polaris
16
02-21-2016 06:31 PM
amalota
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
2
02-05-2016 01:45 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)