1990 Yamaha 350 warrior - ATVConnection.com ATV Enthusiast Community



Reply
 
Thread Tools Search this Thread
  #1  
Old 03-02-2017, 08:48 PM
Weekend Warrior
Thread Starter
 
Join Date: Mar 2017
Posts: 1
Default 1990 Yamaha 350 warrior

I just got a 350 warrior and I've checked the timing its fine. I put new head gasket and cleaned the Carb. It has no power. I've checked valves and they are fine. Has good compression so im thinking its the cam, bad valve, or intake boot. It will rev up but when I ride it it has nothing. It pulls great and when I rev it up and let off it will shoot flame through exhaust. Idles fine runs good for most part. Please help.

Last edited by Hooly; 03-02-2017 at 08:51 PM. Reason: Misspelled
Reply With Quote
  #2  
Old 03-06-2017, 04:03 PM
Trailblazer
 
Join Date: Sep 2016
Posts: 30
Default

Disconnect the air box and leave the carb connected and make sure the slides rising when you are giving it power. (in neutral of course).

I got my wolverine and it had a bad slide diaphragm. Sounded ok in neutral but no power in gear.
Reply With Quote
Reply



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -5. The time now is 04:39 PM.