Buddy Ramp
| Ramp Or Tailgate? Could The Buddy Ramp |
 |
Everyone travels to different riding locations and loading and unloading an ATV are chores that are part of the riding
experience. Loading and unloading can also be a major safety concern, ramps can slip and uneven ground can lead to a disaster. Sure there are plenty of safe ways to go about the loading process, most ramps now have safety leads that hold the ramp from moving. We just wondered if there might be a better way? Carrying ramps means you need a place to store them and they will need to be set-up and put away. What if there was a better way? What if all you had to do was put down your tail gate? That would make the loading/unloading process easy but how could anyone�s tail gate reach to the ground? That would be convenient but how
would that be possible? Simple, use the Buddy Ramp! Yes, the buddy ramp is a folding tailgate that replaces the stock gate of your pickup truck. This gate/ramp gives the ability to load and unload with safety and ease of use. Replacing the original truck tailgate with the Buddy Ramp enables the ramp to be attached firmly to the truck, which means the ramp can not separate from the truck. The Buddy Ramp is very easy to use, this gate is a tri-folding gate that is unlatched as easy as the original gate but now has the ability fold out and down supplying a safe loading platform. That�s great but that�s not all, the tri-folding gate also give the ability to extend the bed 33 inches when lowered and with the back section in the locked position. That means it may be possible for two smaller machines to be transported in one pickup 
bed. The new tail gate worked really well, we liked the ability to load and unload anywhere with out a hassle. Other advantages included easy instillation, no tools required, due to the mesh design, the buddy ramp let air pass through the gate for better fuel mileage. The biggest advantage was safety, the gate/ramp was sturdy and strong! We give the unit a thumbs up, below is a press release that Buddy Ramp distributes. Contact them with any questions on availability�
Dakota Distribution Inc., Brookings SD is the national distribution center for Buddy Ramp. We have dealer opportunities available in all states for this unique ramp designed to replace tailgates on pick-ups.” Customers, from all over the country, ordering or requesting information and demonstrations, are making it necessary to accelerate our dealer development efforts.” said Robert Harrison, Dealer Development/ Sales Director of the company. Buddy Ramp is a patented ramp designed to fit pick-uptrucks using existing tail gate mounts. It requires no tools 
or hardware for installation, which allows it to go on and off in seconds. The ramp folds to a full eight feet covering the box width and is extremely easy for one person to use. Buddy Ramp will load ATV’s, motorcycles, snowmobiles, lawn mowers, snow blowers, golf carts, appliances, furniture and all manner of equipment absolutely safely. You cannot fall off or through the ramp and the ramp will not disconnect from the pick-up box. It will also extend to a full 33 inches in either level or down position for extra long loads or short box pick-ups. Buddy Ramp is manufactured in Canada by Steel City/Coles Gate with whom Dakota Distribution reached an agreement in August of 2001 to market the ramp and establish dealers in the United States. For the past eight months, Dakota has shown and demonstrated the ramp in numerous trade shows and sports events trucks using existing tail gate mounts. It requires no tools or hardware for installation, which allows it to go
on and off in seconds. The ramp folds to a full eight feet covering the box width and is extremely easy for one person to use. Buddy Ramp will load ATV’s, motorcycles, snowmobiles, lawn mowers, snow blowers, golf carts, appliances, furniture and all manner of equipment absolutely safely. You cannot fall off or through the ramp and the ramp will not disconnect from the pick-up box. It will also extend to a full 33 inches in either level or down position for extra long loads or short box pick-ups. Buddy Ramp is manufactured in Canada by Steel City/Coles Gate with whom Dakota Distribution reached an agreement in August of 2001 to market the ramp and establish dealers in the United States. For the past eight months, Dakota has shown and demonstrated the ramp in numerous trade shows and sports events throughout a seven state radius, of it’s location in South Dakota. Typical dealers in the Midwest range from major franchises, such as Harley-Davidson and Honda to individuals and equipment vendors. Buddy Ramp has met with huge success in Canada over the past seven years and more recently, the United States. The warranty is for a full year. It retails at $ 650.00 and comes with a 30 day money back guarantee if not 100% satisfied.” We have the premier personal ramp available. We simply need to get in front of more people.” stated Harrison. Dakota intends to launch an aggressive campaign with various publications and media ads in support of dealers in addition to the Internet, as well as locating new dealers in all states. We invite potential dealer inquires and customers to contact us for further information.