Jumping gigawatts! Dear ATVC: I have a 2010 110cc Tao Tao ATV with a recently replaced CDI box and ignition coil. It turns over but will not fire up. I have taken the plug out and have no spark. I am lost I don’t know what else to replace. Any help is greatly appreciated. Deyles01 […] More »

Heated situation. Dear ATVC: I’m new to ATVs and the back brake pads on my Honda 400EX are rubbing on the rotor and I don’t know what to do? The pads and rotor get hot I have no idea how to make it stop. I loosen bolts and it stops as soon as I tighten […] More »

Tranny troubles. Dear ATVC: My 2002-2004 Kawasaki prairie 650 makes a horrible ratcheting noise the second I hit the throttle in low gear. Also in high gear sometimes when I’m going down hills or just letting of the gas, the machine will make another ratcheting noise and pop the gear shifter into neutral. Anyone know […] More »

Loud and not proud. Dear ATVC: I have a 2016 Suzuki Suzuki King Quad 400 and the front brakes are squeaking very loud. How would I fix this or should I just replace everything? The first thing you’re going to want to do is pop one of those wheels off and take a good look […] More »

Why is there gas going into my pipe? Dear ATVC: After just rebuilding the top end of my 87 Suzuki LT250R, I put it all back together and now when I kick it a few times the exhaust fills up with fuel. I’ve checked over the whole carb and it’s working fine. I’m unsure of […] More »

Mystery machine. Dear ATVC: Could you tell me my quad model in the above pics? Khristian Donaldson Sure can. What you have there is a NUSUN T-Rex 90cc. Model Number : NS100ATV-T The rest of its specs break down as follows: Air/Fan-Cooled, 4-stroke, Single-Cylinder Electric/Kick Start CVT-Belt Automatic Transmission with Optional Reverse Claimed Top Speed: […] More »

Will the smaller motor drop right in? Dear ATVC: Will a Honda 300EX motor fit in 400EX frame with no mods done? Italian1 Yes it will fit, actually with room to spare but if you inquiring whether or not it will require some fabrication to be rideable, the answer is yes. Even if you could […] More »