A likely culprit. Dear ATVC: I have just replaced the wiring harness, stator, starter and electrical components (rectifier, CDI box, starter relay, coil and plug) on a Yongkang Easy Vehicle mini-quad 110 cc, and it is not starting or even clicking. I have it on a jump pack as the battery is weak. It does […] More »
Running great. For a few minutes anyway. Dear ATVC: Took my ATC 185s out recently and it died after about an hour of riding. Wouldn’t fire back up without sitting for a while. Then it died again shortly after. New carb + jetted, DG exhaust & Uni filter. Just like as if it won’t start […] More »
Where to begin when your hubs aren’t playing nice. Dear ATVC: I am new at this, bear with me. I have a 2001 Polaris Sportsman 400 and the front hubs wont engage. The switch (all wheel drive) light will not work, either. I am thinking electrical problems? The fact that neither hub is engaging and […] More »
Not meant to be driven upside down. Dear ATVC: I have a 2016 Yamaha Kodiak 700 that I rolled, busting the top head light. Now the two front headlights aren’t working and neither is the winch. Does anyone know what’s going on? The fact that the top light broke shouldn’t have affected the remaining electrically […] More »
We need to know if this is happening. Dear ATVC: I bought a 1998 Honda 300EX, freshly rebuilt less than 5hrs. He fired it up and it sounded great. I took it home and had to jump it, when I got it to run it ran good and had no problems. I shut it off […] More »
Case of the stalled out electrons. Dear ATVC: I have found numerous posts about loss of electricity, but nothing quite like I am experiencing. I have a new battery, new ignition switch, new breaker, and a new solenoid. My problem is that I have 12 volts going to the battery, but I have no voltage […] More »
Clicking this one seems to do nothing. Dear ATVC: This might sound a bit nuts but I’ve got a quad switch I can’t really identify. I’m trying to find out what the large black switch with the diagonal lines is for. It’s on the left handlebar switch cluster but it doesn’t seem to do anything. […] More »
You must be logged in to post a comment.