Video: Short But Painful

How to end up under your ATV in 2 seconds. Tip of the day: If you’re going to try to do a wheelie for your friend’s camera, make sure your quad isn’t in reverse.
By: Jason Giacchino | May 12, 2022

How to end up under your ATV in 2 seconds. Tip of the day: If you’re going to try to do a wheelie for your friend’s camera, make sure your quad isn’t in reverse.
By: Jason Giacchino | May 12, 2022

Rider optional. Sometimes we think it’s us taking our ATVs around the racetrack when in fact the quad came to compete with or without us! When this guy’s Cannibal 440 dumped him off the back at the start of the moto, the race may have been over for him. But the quad was only just […] More »
By: Jason Giacchino | January 20, 2022

But checkers mean victory, right? This kid tried to beat the system and we commend that. It doesn’t work, though, and we frown upon that. His logic was that by standing on the 200X’s grab bar, even if the machine were to wheelie over, he’d be able to safely step off the back thus impressing […] More »
By: Jason Giacchino | May 20, 2021

Do as I say, son. Not as I do. We like to think our dads lead by example but in this case that comes off as more “what not to do”. Also hiding behind the garbage can while filming is clearly a lesson learned through experience.
By: Jason Giacchino | March 12, 2021

Head in the sky but rubber on the ground. The guys in the 4×4 Side-by-Side feared they had their hands full when they lined up to drag against the potent Yamaha Raptor 700R but so much of racing is getting off the line clean. The guy on the Raptor demonstrates what not to do.
By: Jason Giacchino | December 11, 2020

These two guys grab their Hondas and practice some ground based stunting for the camera. Unfortunately stalling during a wheelie often means a little trip over the bars. This guy demonstrates how to do it with dignity.
By: Jason Giacchino | September 25, 2020

Your machine is geared too low for what you are looking to do with it; or another way of saying it – the current gear ratio is designed less for low and mid range torque and instead for top speed.
By: Jason Giacchino | December 31, 2018
You must be logged in to post a comment.