sla 110 wont start
#2
ok, is there a fuse on the positive side of the battery cable? if so, is it intact?
i presume your quad is a one speed and doesn't shift gears, SO, listen very closely when you apply the left hand brake. you should hear a "tink" at the handlebar and then obviously the brake light should become illuminated. brake lights may work or not, but the brake switch SHOULD. then you should be able to use the starter button or try jumping the solenoid.
another thing to check for is if the remote, if applicable, is working correctly. the umbilical cord shutdown, if applicable, would need to be checked for proper operation--make sure it's plugged in all the way....get back with us with details....thanks.. p.s. when watching a post for replies, refresh the page every minute or so to see if someone has replied. thanks again.
i presume your quad is a one speed and doesn't shift gears, SO, listen very closely when you apply the left hand brake. you should hear a "tink" at the handlebar and then obviously the brake light should become illuminated. brake lights may work or not, but the brake switch SHOULD. then you should be able to use the starter button or try jumping the solenoid.
another thing to check for is if the remote, if applicable, is working correctly. the umbilical cord shutdown, if applicable, would need to be checked for proper operation--make sure it's plugged in all the way....get back with us with details....thanks.. p.s. when watching a post for replies, refresh the page every minute or so to see if someone has replied. thanks again.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)




