Tao tao 125d won't move
 

My son has a Tao Tao 125D, just over a year old.

He has been riding trouble free the last couple weeks, but last night when he went to ride it starts but will not move in either forward or reverse?

I searched forum but haven't relly found this specific problem. Could be clutch but seems strange to fail completely so suddenly.

I have been following the maintenance sched posted by isovapor2112 here:
http://forums.atvconnection.com/chin...ml#post3046969

I changed the engine oil a couple weeks ago and it is full now. Is this il common to clutch or is it a dry set-up? I have not seen anything anywhere about checking or changing trans/clutch oil?

I am out of town so can't check anything right now...just looking for some suggestions.

Thanks

now i've never worked on one of these taotaos, so bear with me.....i just looked at one on the web on taotao's website. looks like an automatic/CVT set up. is that right? if so, is the belt broken? have you checked the shifting forks? how about the rod linkages from the shifter handle down to the tranny/gearbox? did it sound like it was engaging in gear? could the brakes be locked up preventing movement? just a few thoughts and once again, i am sorry if these are shots in the dark as i know not about your quad, i have never even seen one of these in person. just the other brands.

Thanks for replying

It's chain drive and from what I've read it's a clutch set-up but I could be wrong. It has a gear selector for F/N/R so I'll be checking that and the brakes as well. I'm just going off reports from the wife at the moment so we'll see what's up when I get a chance to look at it. I thought someone here might have had the same trouble....

Turns out it was a stripped drive sprocket on the output shaft

bonus! quick, easy, cheap fix!:)

I have the same probably now but I don't know anything about atvs

What's it doin as opposed to not doin? Please elaborate

It will start but won't shift in to forward neutral and reverse only had it for 4 weeks I change the oil and all that but still won't do anything but start

Bear with me, I haven't worked on a taotao in at least 3 yrs (since I had one), automatic/cvt right? If so, did you trace out the shifter linkage & make sure it is intact & working? I currently have a hensim that wouldn't shift but the fix was the linkage not actuating adequately so I adjusted the linkages now all works great

Like what was suggested for the OP and if this is a CVT. There is a belt under a cover (opposite side of chain). Maybe 6 screws or bolts holding it down, this houses the belt, clutch as well as rollers.

The Tao website doesn't help much as far as pics as it only shows the different colors this model comes in.

ATA-125D - TAOTAO USA INC