ATVConnection.com ATV Enthusiast Community

ATVConnection.com ATV Enthusiast Community (https://atvconnection.com/forums/)
-   1) Engine problems.. (https://atvconnection.com/forums/1-engine-problems/)
-   -   110cc basic wiring setup (https://atvconnection.com/forums/1-engine-problems/346700-110cc-basic-wiring-setup.html)

Oneway8732 12-16-2015 01:28 PM

how to bypass wiring setup
 
https://cimg5.ibsrv.net/gimg/atvconn...e53be68222.jpg

Simonk 12-28-2015 04:59 AM

Wiring diagram
 
Hi, any chance you could repost the diagram again as the one uploaded is out of focus. Thanks.

Originally Posted by LynnEdwards (Post 3142442)
Apparently in my last post the attachment 6631 link is broken. It works fine on my computer even now, but not from any other. I suspect that my computer is loading it from internal cache instead of the now broken link at the forum. Here is that link again:

Attachment 6635

Click on the thumbnail for a larger picture.


william0320 02-25-2016 03:16 PM

control box bypass
 
I have a bmx 110cc 4wheeler and the control box burnt up on it. Is there any way I can bypass that control box? Do I need to rewire it? I have a 5 pin cdi. Can anyone help with a wiring diagram

DEEMAN5000 02-17-2018 01:14 AM

Coils
 
Can i put a coil pack on to the wiring system instead of magntic and coils

Mike hurley 04-17-2018 09:14 PM

110coolster, has black box(pc board) with 3 wires in plug, als has a lone black wire solid strand not connected to anything, what is this box, has label with SNYA on it

merryman 04-18-2018 01:50 AM

Sounds like a remote receiver, for a kill switch or something, but start a new thread, posting stuff into this jumble of disconnected threads about different bikes, is pointless.

Skmillertime 01-30-2019 07:12 PM

Taotao 110 atv not starting
 
I have a Taotao 110 atv that is not getting a spark. It is turning over just not starting. I think it is the stator since I have had to replace it many times but I thought I should get a spare CDI also. My problem is there are 5 wires coming from the CDI (green, pink, gray, and red) but only 4 going to the wire harness. The black wire is disconnected. I think it is the timing trigger. If I buy a 5 pin replacement CDI, do I need to disconnect the 5th wire?
https://cimg1.ibsrv.net/gimg/atvconn...ab0edcbfca.jpg
4 wires going to wire harness with black wire not connected
https://cimg1.ibsrv.net/gimg/atvconn...5dd86b3a92.jpg
Back of wire harness on CDI side of harness
https://cimg0.ibsrv.net/gimg/atvconn...8001621e3f.jpg
CDI side on right; green (ground) on bottom left


All times are GMT -5. The time now is 01:21 PM.


© 2024 MH Sub I, LLC dba Internet Brands