Kill switch issue at cdi
#1
Kill switch issue at cdi
Have a 110tao tao that wasn't running. I ran through the electrical and found the issue (stator). Unfortunately for me that was the last thing I checked and ended up over troubleshooting prior to finding issue
by attempting to unplug the kills witch wire at the cdi. It runs but now it will Not shut off. I figured by having a key that I'd sti be able to use it. Nope. So now no safe way to turn bike off. I tried to plug the kill switch wire back in through the white box and then into the CDI but the little spot where the kill switch came from is messed up so it does not fit. How can I bypass this mess, if even possible? Thanks!
by attempting to unplug the kills witch wire at the cdi. It runs but now it will Not shut off. I figured by having a key that I'd sti be able to use it. Nope. So now no safe way to turn bike off. I tried to plug the kill switch wire back in through the white box and then into the CDI but the little spot where the kill switch came from is messed up so it does not fit. How can I bypass this mess, if even possible? Thanks!
Thread
Thread Starter
Forum
Replies
Last Post
AC-Greeny
Chinese Quads
12
05-08-2016 04:03 PM
kfxridr
Kawasaki
0
02-27-2009 10:32 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)