yfz450-15.5 seconds in 1/4 mile
#4
Eh, I don't think 7.2 is possible out of a stock banshee. I think daren420's 420 trinity ran a best of 8.03. My race bike ran 8.3's. My trail bike ran 9.4's. The only thing stock on its motor is the porting and carbs. That is that SBF stroker running?
#7
quads are geared real low. race a fast car in a short race, you might surprise the driver of the car.
Trending Topics
#8
I would think it would be like a 15. maybe a little bit less.........
My truck runs high 14's and my raptor smokes the he!! out of it.......until about 90 then the chevy flys past it..........
so they
the 1/8 of a mile is the way to race a car if the driver will let you.........
my rappy pulls about 5 TRUCK lengths on my truck in the 1/8th mile.......
My truck runs high 14's and my raptor smokes the he!! out of it.......until about 90 then the chevy flys past it..........
so they
the 1/8 of a mile is the way to race a car if the driver will let you.........
my rappy pulls about 5 TRUCK lengths on my truck in the 1/8th mile.......
#9
A few Raptors in our group run in the low to mid 7's around 87 mph in the 1/8th mile and the moded Banshees run in the 6.0 to 6.2 range 104-108 mph range so its hard to say if the 450 will run that in the 1/4th mile. Not long after the 1/8th mile our bikes are topped out because of gearing and they are geared high; up to a 20 tooth on the front of the Banshees. To get a stock Banshee to run 7.2's in the 1/8th mile is something I would like to see. To get either bike to run through the 1/4th mile without topping out real early in the run would kill your 1/8th mile time and it would take some really tall gearing. Slim
#10
Originally posted by: AlkyBurninX
Eh, I don't think 7.2 is possible out of a stock banshee. I think daren420's 420 trinity ran a best of 8.03. My race bike ran 8.3's. My trail bike ran 9.4's. The only thing stock on its motor is the porting and carbs. That is that SBF stroker running?
Eh, I don't think 7.2 is possible out of a stock banshee. I think daren420's 420 trinity ran a best of 8.03. My race bike ran 8.3's. My trail bike ran 9.4's. The only thing stock on its motor is the porting and carbs. That is that SBF stroker running?
Good rule of thumb is take the 1/8 mile ET X 1.5 to get the 1/4 mile ET. This is a very vague approximation of course, but it gets you in the ballpark.


