I have not kept up with is forum much lately so if this has been posted already, I'm sorry. Go to LTE Racing's site and take a look at the bikes they make dual exhaust systems for. The Raptor looks great. Also go to the gallery and see some more pics. [img]i/expressions/face-icon-small-smile.gif[/img]

lteracing.com

 

Yes this has been posted before, but those pipes do look awsome, and I hear they put out some pritty good hp.

 

They are quiet though. Even with the spark arrestors out, they are still really quiet.

 

i know they look soo cool but could the avarage rider (trails and field riders) use those pipes????

 

I don't see why the average rider couldn't use them. They are pricey, but look cool. Do the same thing any other pipes do, might be more flow in the long run though.

 

I just got my twins from lte and went to install them and the head pipes dont line up to the head bolts--- i have to send them back and get new ones that fit better----also there is alot involved in order to install these pipes---re-route about 10 wires, jet,needle,airbox needs modding,heatsheilds etc.... ANd also my buddy has them on his predator and they r very loud with the packing in..

 

i have then on my 400ex i used to have a supertrapp ids2 and i wouldent trade my lte pipes for any thing they give u lots of flow and look great to but i agree they do caust alot more than most pipes

 

I rode a 727 Raptor with the LTE pipes installed, no spark arrestors, it was louder than anything I've ever heard before. You can hear it coming from miles away. Quiet? Must not have been the same pipes.

 

Did any of u have problems installing them mine wont line up to the heads---- flanges r off a little

 

This is a 660 Raptor, LE w/ Red flames and yes they are Looney Tune Exhaust. Says LTE right on the side of each pipe. And they are quiet. Not stock quiet, but they are by no means Alba loud. I hope to get some pic's of that bike sometime as well, just to have on my Gallery with the pic's of my other buddies rides. The 770 Raptor is up on my site below as well.


**They do have some requirements for installation like stated above. My buddy just installed them without doing the rest of the work and took off to try them out and burnt those wires in half. So they are alittle more to installing them compared to other pipes.