CAN-AM (BRP) Discussions about CAN-AM ATVs.

Cylinder question

Thread Tools
 
Search this Thread
 
Old Mar 11, 2004 | 10:05 AM
  #1  
DSaholic's Avatar
Thread Starter
|
Pro Rider
Joined: May 2000
Posts: 790
Likes: 0
Default Cylinder question

Well along with some help from Majorecho I pulled the cylinder last night. Everything looks good except for a score in wall that runs from the bottom to about 1" from the top. You can just feel it with your nail and it doesn't go all the way to the top where the most compression is made. I have no problem with crank case pressure and the bike ran good all last year. What i am getting at is should I just get it honed and put the new piston in like majorecho and I think or does it sound bad enough that it needs to be re surfaced and re coated?
 
Reply
Old Mar 11, 2004 | 10:16 AM
  #2  
SANDMAN430's Avatar
Elite Pro Rider
Joined: Sep 2002
Posts: 6,641
Likes: 0
Default Cylinder question

hone and go major seems to know how to make things run.
 
Reply
Old Mar 11, 2004 | 04:30 PM
  #3  
JSsDS's Avatar
Pro Rider
Joined: Mar 2001
Posts: 1,084
Likes: 0
Default Cylinder question

Can you hone nicosil coating? If so, is there a special hone that should be used?
Just wondering...
If the piston is not worn? why replace it unless you are raising the compression? Ring set is probably all you need if not.
 
Reply
Old Mar 11, 2004 | 05:03 PM
  #4  
DSaholic's Avatar
Thread Starter
|
Pro Rider
Joined: May 2000
Posts: 790
Likes: 0
Default Cylinder question

I am installing a 11.5 to 1 piston and a set of cams. They use a very light stone to put a cross hatch back on the walls and take off the glase so the new rings will seat good.
 
Reply
Old Mar 11, 2004 | 05:21 PM
  #5  
JSsDS's Avatar
Pro Rider
Joined: Mar 2001
Posts: 1,084
Likes: 0
Default Cylinder question

Thanks for the info Dsaholic by the way, long time no hear from. Good to see you're still involved and riding.
I'm beginning to think that I am the last DS owner with a stock engine (depression sets in [img]i/expressions/face-icon-small-frown.gif[/img] ) Maybe its time to play [img]i/expressions/face-icon-small-happy.gif[/img]
 
Reply
Old Mar 11, 2004 | 05:42 PM
  #6  
DSaholic's Avatar
Thread Starter
|
Pro Rider
Joined: May 2000
Posts: 790
Likes: 0
Default Cylinder question

Yea I am still kicking.....[img]i/expressions/face-icon-small-wink.gif[/img]

I just have been over on the snowmobile forum for the winter. Majorecho and I are thinking about coming down for DS days this year to see all you guys again. If he can get the turbo set up it shoold be a fun time watching him tear up the hill.
 
Reply
Old Mar 11, 2004 | 08:01 PM
  #7  
DuneMe's Avatar
Extreme Pro Rider
Joined: Jul 2002
Posts: 3,566
Likes: 0
Default Cylinder question

Originally posted by: DSaholic
Yea I am still kicking.....[img]i/expressions/face-icon-small-wink.gif[/img]

I just have been over on the snowmobile forum for the winter. Majorecho and I are thinking about coming down for DS days this year to see all you guys again. If he can get the turbo set up it shoold be a fun time watching him tear up the hill.
[img]i/expressions/face-icon-small-happy.gif[/img][img]i/expressions/face-icon-small-cool.gif[/img]

Really hope you guys can make it!

I'm trying to organize some of the Sand Mt. regulars to go to St. A's in June 2005. I know it is a way off but, tough to plan when the riding season is so short and we just don't have that many vacations!
 
Reply
Old Mar 11, 2004 | 10:11 PM
  #8  
lilnotts's Avatar
Pro Rider
Joined: Jun 2002
Posts: 2,751
Likes: 0
Default Cylinder question

Originally posted by: JSsDS
Thanks for the info Dsaholic by the way, long time no hear from. Good to see you're still involved and riding.
I'm beginning to think that I am the last DS owner with a stock engine (depression sets in [img]i/expressions/face-icon-small-frown.gif[/img] ) Maybe its time to play [img]i/expressions/face-icon-small-happy.gif[/img]
lol we're starting to become scarce
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
John Reed
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
1
Sep 9, 2015 03:46 AM
bmark0610
General Chat
1
Sep 7, 2015 09:42 PM
MooseHenden
Introduce Yourself
2
Sep 6, 2015 04:24 PM
Steeldon
Utility ATVs
0
Sep 5, 2015 09:38 PM
Logan Collins
Classifieds, Garage Sale & Swap Shop
0
Sep 5, 2015 08:03 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 12:25 PM.