CAN-AM (BRP) Discussions about CAN-AM ATVs.

Lectron Sets the Bar - HIGH!

Thread Tools
 
Search this Thread
 
Old Mar 14, 2004 | 01:13 AM
  #1  
BigDaddy331's Avatar
Thread Starter
|
Pro Rider
Joined: Feb 2003
Posts: 1,218
Likes: 0
Default Lectron Sets the Bar - HIGH!

I'm sure that most watched my "Food For Thought" fiasco play out. While most of you don't know what went on behind the scenes between the parties involved, I figure I would let you know how the entire situation concluded. I owe it to Lectron, Randy, and especially Eric (Mr. HP).

After all was said and done, and the appologies were handed out, I requested that someone from Lectron contact me. I sent this message through Randy..... Let's just say that Lectron must respect Randy.
I received a call Friday from the Vice President of Lectron Fuel Systems. This Lady was SHARP! Long story short, she took me through their investigation of the situation, informed me of the results and gave me an appology. Dr. Quance (spelling ?) spent almost 20 minutes with me on the phone, gave me more info than I could have ever hoped for and gave me a personal invitation to call her or her R&D staff anytime I wanted. To say that Dr. Quance is kind of bright, would be a tremendous understatement. As a consultant to the Pentagon, Holley, and MUCH more I think we're pretty safe with LECTRON carbs.

Point blank, from her mouth to my ears...

Mr. Oldham is only person that has done any extensive R&D with our Lectron Carburators for the DS 650.

As not to become a commercial for Mr. HP I'll start to wrap this up.
The Lectron may or may not be for you, only you can be the judge. I have seen the Lectron 48 smoke a TM 48, and I know that they work. What benifits will you see? I'll leave that to the expert. I can only say that when dealing with the expert, you can be sure that your best intrests will be his main concern - you can trust him! I do, and I may have been his most vocal critic. I will do business with him and LECTRON as long as my sled is in my garage, and as long as they are working with the beast known as the DS 650.

Thank you Eric, Randy, and Lectron Fuel Systems.

BigDaddy
 
Reply
Old Mar 14, 2004 | 09:54 AM
  #2  
sixsixT's Avatar
Extreme Pro Rider
Joined: May 2002
Posts: 3,286
Likes: 1
Default Lectron Sets the Bar - HIGH!

[img]i/expressions/face-icon-small-wink.gif[/img]
 
Reply
Old Mar 14, 2004 | 03:31 PM
  #3  
CountryJoeGlass's Avatar
Pro Rider
Joined: Feb 2002
Posts: 2,324
Likes: 0
Default Lectron Sets the Bar - HIGH!

[img]i/expressions/face-icon-small-cool.gif[/img]
 
Reply
Old Mar 14, 2004 | 05:45 PM
  #4  
DSJOBBER's Avatar
Pro Rider
Joined: Jan 2003
Posts: 413
Likes: 0
Default Lectron Sets the Bar - HIGH!

Wow sounds like you need to get out the knee pads and vaseline...JUST KIDDING... I think I will be buying a Mr. HP Lectron as a replacement for the stock one when I do upgrade, especially after all the testimonials.
 
Reply
Old Mar 14, 2004 | 07:22 PM
  #5  
CountryJoeGlass's Avatar
Pro Rider
Joined: Feb 2002
Posts: 2,324
Likes: 0
Default Lectron Sets the Bar - HIGH!

DSJOBBER, MrHP & BigDaddy are better than that. check out hpresearch.net & the picture is worth a 1,000 words. I think it's all good!
 
Reply
Old Mar 14, 2004 | 10:00 PM
  #6  
SandyBear's Avatar
Pro Rider
Joined: Nov 2003
Posts: 726
Likes: 0
Default Lectron Sets the Bar - HIGH!

Dang BigDaddy,

This reminds me of the Coke promo in the 80s. You get a promotion to VP at Lectron now?? JK. Thanks for your inquisitive research into the bum scoop (info) you were passed and for sharing it with us all.

Ken
 
Reply
Old Mar 15, 2004 | 01:08 AM
  #7  
Kintama's Avatar
Pro Rider
Joined: Jun 2003
Posts: 335
Likes: 0
Default Lectron Sets the Bar - HIGH!

Originally posted by: DSJOBBER
Wow sounds like you need to get out the knee pads and vaseline...JUST KIDDING... I think I will be buying a Mr. HP Lectron as a replacement for the stock one when I do upgrade, especially after all the testimonials.









Wow sounds like you need to get out the knee pads and vaseline
 
Reply
Old Mar 15, 2004 | 12:16 PM
  #8  
Billsner's Avatar
Pro Rider
Joined: Apr 2003
Posts: 224
Likes: 0
Default Lectron Sets the Bar - HIGH!

Originally posted by: COUNTRYJOEGLASS
DSJOBBER, MrHP & BigDaddy are better than that. check out hpresearch.net & the picture is worth a 1,000 words. I think it's all good!
alot of GOOD people around here!!!

 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jeepwheelin02
1) Engine problems..
5
Jul 18, 2020 06:42 PM
donintennessee
Polaris
3
Aug 19, 2015 02:22 PM
JohnnySplat
Yamaha
6
Aug 6, 2015 12:07 PM
willday08111217@gmail.com
Technical and How-To Articles
0
Aug 1, 2015 04:05 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 12:34 PM.