CAN-AM (BRP) Discussions about CAN-AM ATVs.

How much?

Thread Tools
 
Search this Thread
 
Old May 15, 2005 | 04:00 PM
  #1  
Bomberboy's Avatar
Thread Starter
|
Range Rover
Joined: Jul 2004
Posts: 135
Likes: 0
Default How much?

About how much is a stock clutch for a ds?
 
Reply
Old May 15, 2005 | 04:32 PM
  #2  
jackass650's Avatar
Pro Rider
Joined: Sep 2004
Posts: 733
Likes: 0
Default How much?

the fiber discs? steel discs? basket? pressure plate? the springs? or the whole package? i have a receipt here somewhere for my steel plates i bought they were 67.76 for 8 1.5 mm steel plates,44.75 for 60% stiffer springs from ron wood, and i think he quoted me a price of something like 74.00 for the fiber discs, please if I am wrong someone correct me on this, and I am not sure about the basket or pressure plate, barnett has a kit with steel and fiber discs and heavier springs for like i think around 130.00 once again someone please correct me if i am wrong, hope this helps
 
Reply
Old May 15, 2005 | 04:34 PM
  #3  
JMAC650's Avatar
Pro Rider
Joined: Apr 2002
Posts: 1,565
Likes: 0
Default How much?

I think we paid around $200 for steel plates, fiber plates, 60% springs, and gasket.
 
Reply
Old May 15, 2005 | 04:51 PM
  #4  
jackass650's Avatar
Pro Rider
Joined: Sep 2004
Posts: 733
Likes: 0
Default How much?

are those through barnett? i know the gasket is like 12.45
 
Reply
Old May 15, 2005 | 04:58 PM
  #5  
R00ST's Avatar
Pro Rider
Joined: Jul 2003
Posts: 1,730
Likes: 0
Default How much?

or you could do what I did, and get them off ebay. I havnt seen any lately, but for awhile there were a lot of them on there. I got mint entire clutch basket (actuator/discs and all) that came off an 03 that I got for 45 shipped.
 
Reply

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 03:58 AM.