Jetting question
Aug 7, 2005 | 10:10 PM
#1
Thread Starter
|
Range Rover
Joined: Jan 2004
Posts: 187
Likes: 0
Jetting question
I want to swap in a 34mm carb on my 250 XPLORER
I already have a syclone jug bored .080 and head milled .020
stock pipe stock gearing
I have the needle jet from the 30mm carb installed in the 34mm carb
I have a 6DH29 needle that came with the 34mm carb
and just want a starting point for main jet and pilot jet
I an running at 3500 to 5000 feet on average
I already have a syclone jug bored .080 and head milled .020
stock pipe stock gearing
I have the needle jet from the 30mm carb installed in the 34mm carb
I have a 6DH29 needle that came with the 34mm carb
and just want a starting point for main jet and pilot jet
I an running at 3500 to 5000 feet on average
Thread
Thread Starter
Forum
Replies
Last Post
MIKEYTRXSHEEBANGS
Dunes and Dune Machines
0
Aug 27, 2015 12:57 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)