I've been searched around trying to figure out what carb to get, and i noticed pami sells dual 36mm's for only 540 dollars. complete kit. this is about the same price as a tm45. im wondering as in complete set does this include a dual intake manifold? throttle cables? etc. etc. and also what kind of performance difference would these be VS. the tm45 or lectron 46mm

 

You can contact the bom he should be able too answer that question i have run a set of dual carbs on a stage three before with great sucess but ill bet thats just the carbs,you can get the intake from ron woods and any banshee dual set up should work for cables.

 

That price (540) is on EURO. You will have to do an exchange rate for the true cost.

The carbs work great and jet just like the TM's do. Better than the 45's and as good as the 48's but better on top. You do have to get the filters , intake and cable (the TM cable works with a little mod), extra like other carbs.

 

[img]i/expressions/face-icon-small-happy.gif[/img] see i told you.

 

I run duals does anyone know if there is a metal intake. Mine is rubber and am wondering about porting it

 

Pami has a metel one but won't work with the stock DS frame. [img]i/expressions/face-icon-small-sad.gif[/img]

The rubber one can be ported with no problems. It just takes some one that knows how.

 

Now this is one of the more interesting threads in the CanAm forum today. =]

 

Why what different than the rubber one. Im running the Lectron dual 40s

 

hmmm interesting 694 dollars for the duals but it says an extra 16% for freight charges and insurance fees... im curious are there any people state side that has pami products? and also im wondering where to find the throttle cable, intake, and filters for this setup

 

AHHuum ron woods for intake,fastbygast for cable,And THEBOM dealer and meaner i hope your running nitro threw them lectrons