Hey i have an 06 raptor 350 and all i have on it is a k&n air filter... what are some good mods, and what do you think about a stroker kit for it? and i was also wondering if there is any way to make it liquid-cooled... thanks

 

Good starter mods for a Raptor 350 would be: HMF or FMF Factory 4 Pipe, hi-flow air filter, remove the airbox lid, re-jet, and maybee a new front sproket. But before you do any of those I would add full underbody skid plate, and some nerf bars, as far as stroker kits/pistons I would save the money and not do that till you need a top end rebuild.

 

Hey there. I have a 2006 Raptor as well. Did you have any trouble with your chain rubbing excessively on the swing arm skid plate? I have the GYTR plate and the chain makes a nasty noise when rubbing against that white bar. I tightened the chain within specs but it still rubs.

 

didn't you already ask this??

 

Yea mine does that same $hit. [img]i/expressions/face-icon-small-disgusted.gif[/img]

 

Best mod for it would be to save your money and then sell it and get a 660 or 700. =]

 

I agree

 

396 Stroker Problems Don't know if you saw that thread but look at all of the problems this kid is having with his Raptor with the stroker kit on it.