Kawasaki Discussions about Kawasaki ATVs.

NEW DYNATEK for Brute Force 750

Thread Tools
 
Search this Thread
 
Old Nov 5, 2006 | 11:32 PM
  #1  
Rowdy5050's Avatar
Thread Starter
|
Trailblazer
Joined: Oct 2006
Posts: 54
Likes: 0
Default NEW DYNATEK for Brute Force 750

There is a new dynatek on ebay for the Brute Force 750 that says it has 4 programmable timing curves is this true it is programmable like the copper head and if so does it still have that stuttering or missing that everybody talks about at half throttle? Just wondering if any body had heard about this or is running one of these?


here is the ebay page you can copy and paste it I think. http://cgi.ebay.com/ebaymotors/ws/eB...9945&rd=1&rd=1
 
Reply
Old Nov 6, 2006 | 01:24 AM
  #2  
grizzkiller's Avatar
Pro Rider
Joined: Feb 2003
Posts: 533
Likes: 0
Default NEW DYNATEK for Brute Force 750

well, i was just on Dynatek's website and there is no listing for a programmable CDI. they only list the non-programmable one for the BF. plus this one on ebay is selling for the same price as the non-programmable one. i would think that a new programmable version would cost alot more, ALOT more, like $400. thats what the vdi copperhead goes for. i've been known to be wrong before, but not often hahaha!!!!
 
Reply
Old Nov 6, 2006 | 02:27 AM
  #3  
bfb750BF's Avatar
Pro Rider
Joined: Feb 2003
Posts: 911
Likes: 1
Default NEW DYNATEK for Brute Force 750

I tried the Dynatek CDI for my '05 BF & it did have that engine miss But only at the 7-11mph range, slow going wheeling. I tried fixing the problem But since my rejetting was right on for my Elevation that I ride at & the needle adjustment was right on too, I didn't want to screw around with it. I sold the CDI to a P650 owner. Now I have just been using the MOOSE Module. Now that I have bought the '07 BF750, the MOOSE will be coming out of the '05, along with a bunch of my other goodies.
My Camera section has a PIC of the '07 Blue Thunder.
 
Reply
Old Nov 6, 2006 | 06:29 PM
  #4  
grizzkiller's Avatar
Pro Rider
Joined: Feb 2003
Posts: 533
Likes: 0
Default NEW DYNATEK for Brute Force 750

it seems to be 50/50 with the dynatek miss. alot say they have it, alot say they dont. fortunately, i dont have the miss. because mines an 05, i had the front needle that was changed due to the tech bulletin. this i believe richened my bike quite a bit. so when i added a K&N filter/prefilter and the Dynatek CDI it kinda evened things out. so now it runs spot on. the idle seems a hair high but thats an easy change.
 
Reply
Old Nov 6, 2006 | 09:10 PM
  #5  
Rowdy5050's Avatar
Thread Starter
|
Trailblazer
Joined: Oct 2006
Posts: 54
Likes: 0
Default NEW DYNATEK for Brute Force 750

if you look at the site i was reading over it again and it says that the programming kit is not included sold seperatly
 
Reply
Old Nov 6, 2006 | 11:36 PM
  #6  
Rowdy5050's Avatar
Thread Starter
|
Trailblazer
Joined: Oct 2006
Posts: 54
Likes: 0
Default NEW DYNATEK for Brute Force 750

ok never mind the guy finally messaged me back through ebay and said that it is an error that is for a different atv the dynatek is not programmable on the brute force 750. I knew it was to good to be true
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Pgbama11
Kawasaki
21
Jan 16, 2016 08:19 AM
ylomnstr
Kawasaki
3
Sep 22, 2015 12:19 AM
Pgbama11
Yamaha
10
Sep 10, 2015 08:20 AM
ylomnstr
Kawasaki
0
Sep 10, 2015 06:45 AM
ylomnstr
Kawasaki
0
Sep 4, 2015 05:02 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 03:11 PM.