I recently wrecked my Raptor 700 (rolled it down a rocky hill), and had to replace just about everything (bent frame, downtube, bars, plastics, rims, tires, radiator, etc. etc.). I just got it back from the shop, and first trip to the dunes it seemed to be leaking coolant out of the overflow tube and all over the motor. After much inspection, I identified that it could be coming from no where else. Pre wreck I did not have this issue. It seems that all hoses are hooked up right, the bike seems to be running a little hot (but it has been hot outside the last couple of trips).

After the first trip, I drained the coolant from the bike and overflow tank and refilled. Monitored it closely on the second trip, same issue. Because I never experienced this issue prior to the wreck, so what could be the potential issues now.

By leak I mean it will drain from the high mark to well below the low mark in 1-2 rides.

Any input would be greatly appreciated.