Yamaha Discussions about Yamaha ATVs.

Did anyone try an exhaust on the raptor yet!

Thread Tools
 
Search this Thread
 
Old Dec 12, 2000 | 01:20 PM
  #1  
xtreme165's Avatar
Thread Starter
|
Pro Rider
Joined: Sep 2000
Posts: 627
Likes: 0
Default

I know someone out there has, so if that someone is YOU can you let everyone know if it made a drastic differance like the manufactures are saying it does!
 
Reply
Old Dec 12, 2000 | 02:11 PM
  #2  
ERICsRAPTOR's Avatar
Pro Rider
Joined: Oct 2000
Posts: 806
Likes: 0
Default

I'm hoping it does. It seems that the engine is really restricted. Opening 'her' up should provide some good response, in my eyes at least.
 
Reply
Old Dec 12, 2000 | 05:13 PM
  #3  
RAPTIZED's Avatar
Weekend Warrior
Joined: Dec 2000
Posts: 19
Likes: 0
Default

I HAVE THE WHITE BROTHERS E SERIES. I HAD TO REJET TO A 150 ON THE LEFT AND A 155 ON THE RIGHT CARB. A STOCK AIRBOX WITH THE RESTRICTIONS CUT OUT. I AM IMPRESSED WITH HOW THE POWER IS MORE USEABLE. THE BEST IMPROVEMENT IVE DONE SO FAR IS A 43 TOOTH REAR SPROKET.I THOUGHT IT WOULD SACRIFICE TOP END BUT I WAS VERY WRONG.THE ENGINE WILL NOW PULL TO THE REV LIMITER IN HIGH GEAR. MY FRIEND HAS A DS650 AND WE WERE CLOSE ON A TOP END DRAG RACE BUT I CAN PUT IT TO HIM PRETTY BAD NOW.
 
Reply
Old Dec 12, 2000 | 05:21 PM
  #4  
BOOGIEMAN's Avatar
Trailblazer
Joined: Nov 2000
Posts: 63
Likes: 0
Default

I have the White Brothers and love it and I havent rejeted it either plug looks perfect so I havent even bothered it. I gained alot all along the powerband. Highly recommend it.


Boogieman
 
Reply
Old Dec 12, 2000 | 05:43 PM
  #5  
ETXLR8's Avatar
Trailblazer
Joined: Aug 2000
Posts: 57
Likes: 0
Default

What about the Big Gun exaust? what made yall go with the e-series? the reason i ask i can't seem to decide between the two.
 
Reply
Old Dec 12, 2000 | 06:11 PM
  #6  
joeyd's Avatar
Pro Rider
Joined: Nov 2000
Posts: 443
Likes: 0
Default

I have the same pipe..let me ask a stupid question. How do you determine which is left or right? Is it by the way you sit on the bike?..also where di d you get your jets from?
 
Reply
Old Dec 12, 2000 | 07:31 PM
  #7  
ChrisDS650's Avatar
Range Rover
Joined: Dec 2000
Posts: 105
Likes: 0
Default

Wait and check out the Sparks.. They always have top Notch kits for fourstrokes.
 
Reply
Old Dec 12, 2000 | 08:56 PM
  #8  
rigoni's Avatar
Trailblazer
Joined: Nov 2000
Posts: 34
Likes: 0
Default

I have put on the Big Gun Exhaust. I love it, way louder than before. Seems to have more power all around. Had to rejet it to 150 and 155. Was anyone able to get the the carb bowls easy, I took apart everything to get the carbs off. I just ordered the Big Gun header pipe, can't wait till the K&N comes out. I don't know how it compares to the White Bros. I also highly recommend regearing, I went with a 44 rear sprocket, much better.
 
Reply
Old Dec 12, 2000 | 09:21 PM
  #9  
SPL2000's Avatar
Weekend Warrior
Joined: Dec 2000
Posts: 22
Likes: 0
Default

Is it really necessary to re-jet the carbs if you change the exhaust system? What happens if you dont?
 
Reply
Old Dec 12, 2000 | 10:26 PM
  #10  
BOOGIEMAN's Avatar
Trailblazer
Joined: Nov 2000
Posts: 63
Likes: 0
Default

I went with White Brothers because of their rep in the four stroke engine perf. I have had many fellow riders tell me that the White Bros gave their fourstroke more all around power and thats why I choose em. And no you dont have to rejet with the White Bros.

Boogieman
 
Reply



All times are GMT -5. The time now is 09:49 AM.