Hi i have a 2005 Polaris 330 Trail Boss, i have purchased a new chain, but now i need to adjust it to make it fit properly. i guess there are two bolts near or around the housing that should be lossen, then you rotate the hosing in the direction to either lossen or tighten, i dont havre a manual, thought i would ask before i tear into this! Any help would be great!!
Thanks
Ciscokid64

 

i would say by looking that the 2 rear bolts loosen and if the brake caliper is mounted there looses them as well.

 

Thanks for the help, it shouldnt be to difficult!
Ciscokid64